A tyre size is written on the tyre's sidewall as a sequence such as "205/55 R16 91V" and, from left to right, shows the width, the aspect ratio, the construction, the rim diameter, the load index and the speed symbol. In this example, the tyre is 205 millimetres wide, its sidewall height is 55% of its width, it has a radial construction and it is made for a 16-inch rim; 91 tells you the load it can carry, and V the maximum speed it can safely reach. The explanations below are based on the European Commission's guide to reading tyre parameters.
What do the numbers in a tyre size mean?
The European Commission splits the information on passenger car (C1) tyres into two parts: the tyre size and the service description. Let us read the "205/55 R16 91V" example piece by piece:
- 205, section width: The tyre's width from one sidewall to the other, in millimetres.
- 55, aspect ratio (profile): The ratio of the sidewall height to the width, as a percentage. The smaller the number, the lower the sidewall.
- R, construction: R indicates radial construction, B cross-ply (bias) construction. Today the great majority of tyres are radial.
- 16, rim diameter: The diameter of the rim the tyre fits, in inches.
- 91, load index: A code showing the maximum load a single tyre can carry.
- V, speed symbol: A letter showing the maximum speed at which the tyre can operate.
If you see "RF" in front of the rim diameter (for example 245/45 RF19), it shows that this is a "run flat" tyre with reinforced sidewalls that can still travel a limited distance when it has lost air.
How do you read the load index and speed symbol?
Both are codes that match fixed tables. A few common examples from the European Commission's table:
- Load index 82 = 475 kg, 88 = 560 kg, 91 = 615 kg, 94 = 670 kg, 100 = 800 kg
- Speed symbol T = 190 km/h, H = 210 km/h, V = 240 km/h, W = 270 km/h, Y = 300 km/h
The load index is for a single tyre; the heavier the vehicle, the higher the index needed. According to the Commission's explanation, a tyre's speed symbol should be above the vehicle's approved maximum speed; for winter tyres, and for the winter season only, national legislation may allow a lower speed symbol.
What should you watch out for when buying new tyres?
The European Commission's basic rule is clear: unless the vehicle has been given a separate approval for different tyres and rims, new tyres must be the same size as the original tyres and must be compatible with the rim. There may be limited differences in the service description (load and speed).
- Note down the size sequence on the sidewall of your current tyre exactly as it is, or take a photo of it.
- Look in your vehicle's owner's manual for the tyre sizes specified for your vehicle.
- Check that the size of the new tyre (width, profile, construction, rim diameter) is exactly the same.
- Make sure the load index and speed symbol meet your vehicle's requirements.
- Check whether the tyre is directional or asymmetric; it must be fitted according to the fitting direction marking on its sidewall.
- If you are looking for winter tyres, check the snowflake and mountain symbol or the M+S marking on the sidewall.
What other markings are on a tyre's sidewall?
- Production date (DOT): The rightmost part of the sequence on the sidewall that starts with "DOT" shows the week and year the tyre was made. For example, if this part reads 3524, the tyre was made in the thirty-fifth week of 2024.
- Wear indicators: These are small raised bars placed along the grooves of the tread and are 1.6 millimetres high. If the tread has worn down to the level of these bars, the tyre has reached the legal minimum tread depth.
- E mark: A letter "E" and a number inside a circle show that the tyre family has received type approval.
- Snowflake and three-peaked mountain (3PMSF): Found on winter tyres that have passed a braking test in severe snow conditions. An icicle symbol, on the other hand, indicates tyres approved for severe ice conditions.
- Original equipment marking: Some tyres carry a special code showing that they have been approved for a particular car brand.
What does the tyre label tell you that the size does not?
The European Union tyre label on new tyres shows performance, not size: rolling resistance (its effect on fuel or energy consumption), wet grip and external noise class. Where applicable, the label also carries the snow and ice symbols. The QR code on the label takes you to the tyre's detailed entry in the EU product database (EPREL).
Your choice of tyre directly affects safety. If you are not sure which size is right for your vehicle, look in the owner's manual or ask a tyre specialist.
For other car care topics, take a look at the Car Care section, or for all topics, the Guides page.
Frequently asked questions
What does 205/55 R16 mean?
205 is the tyre's width in millimetres; 55 is the ratio of the sidewall height to the width (as a percentage); R is radial construction; and 16 is the diameter, in inches, of the rim the tyre fits.
What does 91V on a tyre mean?
91 is the load index and shows that a single tyre can carry at most 615 kg. V is the speed symbol and tells you the tyre is suitable for a maximum speed of 240 km/h.
How can you tell a tyre's production date?
The rightmost part of the sequence on the sidewall that starts with "DOT" shows the production week and year. For example, 3524 means the thirty-fifth week of 2024.
Can you fit tyres of a different size?
According to the European Commission, unless the vehicle has been given approval for different tyres and rims, new tyres should be the same size as the original tyres. There may be limited differences in the load and speed values; if you are not sure, look in the owner's manual or ask a specialist.
What do RF or run flat on a tyre mean?
The RF marking in front of the rim diameter indicates a run flat tyre with reinforced sidewalls that can still travel a limited distance when it has lost air. The maximum distance and speed in this situation vary by manufacturer.
What does the snowflake marking on a tyre mean?
A snowflake inside a three-peaked mountain (3PMSF) shows that the tyre has passed a braking test carried out in severe snow conditions. This symbol appears on the sidewall of winter tyres and on the tyre label.
How do you check tyre tread depth?
Look at the wear indicators placed along the grooves of the tread. These raised bars are 1.6 mm high; if the tread has worn down to their level, the tyre has reached the legal minimum tread depth and should be replaced.
Editorial desk
Stories signed by the Cultvia editorial desk follow our editorial policy; every story lists its sources at the end and errors are fixed under our corrections policy.
Last updated:
What changed?
- : First published
Your follow list is kept only on this device; when the page is updated you'll see it in Following.
Get email updates
Sources
- How to read the tyre parameters — Avrupa Komisyonu
Up next
Car Care & RepairWinter or all-season tyres: which suits your driving?26 October 2026 · 4 min read