Skip to content
TR

What is ABS, the anti-lock braking system?

How the anti-lock braking system works, why the pedal vibrates and what to do in an emergency stop: a short definition, an example and how brake assist differs.

By Cultvia Editorial2 min read
A driver holding the wheel with both hands on a rainy road
Illustrative image · Photo: erwinbosman / Pixabay

ABS (Anti-lock Braking System) is a brake safety system that helps you keep control of the steering by stopping the wheels from locking and skidding during hard braking. A locked wheel cannot grip the road, and the car may carry on sliding straight ahead even if you turn the steering wheel. To prevent this, ABS adjusts the brake pressure for you very quickly.

How does ABS work?

The system consists of sensors that monitor how fast the wheels are turning, an electronic control unit that evaluates this information, and valves that open and close off the brake pressure. When you brake hard and a wheel is about to lock, the control unit briefly reduces the brake pressure on that wheel, then increases it again once the wheel starts turning. This cycle repeats many times a second.

When ABS kicks in, you may feel a vibration or clicking in the brake pedal and hear a humming sound; this is normal. The Highway Code, the United Kingdom's official guide to the rules of the road, advises that in a car with ABS you should brake firmly in an emergency and not release the pressure until the car has slowed to the speed you want. The same guide also gives an important warning: ABS helps you keep steering control, but do not assume that the car will always stop in a shorter distance.

Example

On a rainy evening a car suddenly pulled out in front of you, and you pressed the brake all the way down. In a car without ABS, the wheels may lock and the car may skid without responding to the steering. In a car with ABS, you feel the pedal vibrate; if you keep pressing without letting go, the wheels keep turning and you can steer to avoid the obstacle. On wet or slippery surfaces you still need to increase your following distance.

What is the difference between ABS and brake assist?

ABS prevents the wheels from locking. Emergency brake assist, on the other hand, detects that the brake has been pressed suddenly and hard in an emergency, and quickly raises the brake pressure up to the point at which ABS steps in to prevent locking. In other words, brake assist increases braking force, while ABS makes sure the wheels do not lock under that force. The two systems usually work together. If the ABS warning light on the dashboard stays on, look at your car's owner's manual and have the system checked at a garage.

Frequently asked questions

What does ABS do?

It stops the wheels from locking during hard braking. This lets you steer around an obstacle while the car is slowing down.

Why does the pedal vibrate when ABS kicks in?

Because the system reduces and increases the brake pressure many times a second, you feel a vibration or clicking in the pedal. This is normal; keep pressing without releasing the pedal.

Does ABS shorten the stopping distance?

Not always. The main purpose of ABS is to keep steering control. The Highway Code also advises you not to assume that a car with ABS will stop in a shorter distance.

Should you pump the brake in a car with ABS?

No. ABS does the pumping itself. In an emergency, press the pedal firmly and keep up the pressure until the car has slowed to the speed you want.

What should I do if the ABS warning light comes on?

If the light stays on, look at your car's owner's manual and have the system checked at a garage as soon as possible.

Cultvia Editorial

Editorial desk

Stories signed by the Cultvia editorial desk follow our editorial policy; every story lists its sources at the end and errors are fixed under our corrections policy.

#glossary#driving safety#ABS#brakes

Last updated:

What changed?
  1. : First published

Your follow list is kept only on this device; when the page is updated you'll see it in Following.

Get email updates

We'll email you the "What changed?" summary when this page is updated. You'll need to confirm your address first.

Your email is used only for this page's update notices; no newsletters or ads. Every email has a one-click link to stop; when you do, your address is deleted.

Sources

  1. The Highway Code: General rules, techniques and advice for all drivers and riders (103 to 158), Rule 120 ABS — GOV.UK
  2. Motorlu Araçlar Teknolojisi: Fren Sistemleri (modül) — Millî Eğitim Bakanlığı (MEGEP)
Was this helpful?
Report an error

Spotted wrong information, a calculation error or a technical problem? Tell us briefly and our editors will review and fix the page.

We store the page address and browser details with your report. Your email is only used to reply, is never shared and is deleted once the report is closed.

Up next

Tyre tracks in the snowCar Care & RepairWinter or all-season tyres: which suits your driving?26 October 2026 · 4 min read
More from Guides